Final year project for electronic engineering

assalam o alikum!

INTRODUCTION:

                                                   before going to hovercraft i'll put some light on it about it's background , origin , how it was made and the purposes and uses of it.

  

                                          from past i have shown in my blog i wrotten before about the drone and it was a something new for me to make an implement it and make it by my self and i'm very satisfied from the work i have done it was a moment of joy for me and i enjoyed it very much.

                    but after the discovery of drone the new thing was that why can't we combine all the three medium U.A.V like we use drone in air car L.F.R on ground and Ship's in water.... so after the thinking and a lot of meetings of engineer's it was decided make an U.A.V that can travel in all the three medium's and so some new thing was made that was latter named as hovercraft..

Design: 

                                next step is how to design a hover craft because it has to travel in all the three modes so it's designing was a difficult task rather it took long time of mine to upto 6 month's to design it but i was succeeded the design was to make two duck's in two part's of the design one horizontally and other vertically.

horizontally was to lift it up and vertical was to move it forward, having a parachute hard material piece of cloth.

 design will be cleared when you watch the video.  

Fabrication: 

                        fabrication  was easy for it rather  than it's design and other work all you need was just motor's propeller ardiuno radar RC circuit.

1. Motor's must be 23k  rpm 
2. propeller of clockwise with feasible  length according to the body.
3. RC circuit of it's controlling 
4. ardiuno
5. hurdle detector i used Sonar ultrasonic
6. live camera.
7. batteries for motor's lipo
8. battery for electronic circuit 12V.

Working: 

                there are two way's to control it one is using Bluetooth module so you can use and control it from any android app.

 simply connect the ardiuno with motor's by putting it's blue wire's the signal wire in ardiuno board and other two with batteries remember for the motors you will need different battries to get a good output so the hovercraft can be operated for a longer time.

         next step is of programming which is the easiest one just connect the ardiuno board to laptop and program as simple as you can just to give command of forward and move the radar left and right for the movement of hovercraft and also implement the coding of hurdle detector.

the vedio will show it in working.

                                                        https://www.youtube.com/watch?v=DtDzSMK_sco

Uses of  hovercraft: 

1. it's an easy and less time consuming project.
2. A good and one of the best final year project's.
3. It can be used in 3 modes air water and ground.  
4. It can be used do rescue the people injured in flood or earth quick.
5. It can be used in every that place where we can't help human's like in earth quick or flood we can use it to sent food medical equipment's.
6. it is lighter in weight so it can fly upto 3 feet's and can cross the heavy river's or flood area and can move upto 8 person's depending on the size of hovercraft.

do support for more project's if there is any problem any question just mention it below in comment i will answer it .                              

Ronaldinho 2015

Assalam o alikum!

                               best ever and last vedio of 

R10

flying RC car.

Assalam o Alikum!

                                 Do you want a practical personal flyingcar? I really want it, so i made a cute monster. It's a concept model of flyingcar. Actually the monster had take off and land safely without crash,

I believe human can free flight in this century.  people can easy to dive aircraft as a car(with wheels).
If a aircraft will become a practical flying car. I think it must be have these basic feature:
1. VTOL(vertical take off and landing)
Even most rich place or country in the world, you can't build airport for every family. If a practical family aircraft always take off or landing with airport, it's really not easy to use. it can't became the public transportation.

2. All moving part must be inside shells. 
Many modern city always crowd. The flyingcar must safely fly through between high-rise. And can get some small collision without crash, not such as helicopter.

3. Technology was extreme low-end and structure was extreme simple.
Most often something was more simple means it will more cheap and safely. I hope the flyingcar is cheap, very family can buy it.

4. Fly don't  be dependent on aerodynamics, but dependent on a stupid truth: thrust > gravity.
That's really important. If a aircraft can fly without aerodynamics, means it will easy to made. Everyone can build it.

5. Long distance of flight
World's first manned flight with an electric multicopter was succeeded in Germany.  The multicopter will become practical  flyingcar. But now the battery really don't enough for Long distance's flight. So the flyingcar must can use other engine(eg: jet, piston).

I wasn't a rich guy or celebrity. So i don't have enough money to make real flying car, i just share my idea: SPOFC
If you interesting in this idea, please try make a cute model or tell other one. Let us try build real flying car by everybody.

STEP NO 1:

The air has one way in to three way out. Every gas outlet need control flow rate, so there is a 3 point made different force, it can control the flying car movement. One outlet of three can rotate, it can control the flying car's direction.
The control system come from traditional helicopter CCPM system, but not exactly same, need do some fix. You can found more detail in step 10 and 11.

Step 2: Prepare Material for Flying Car

1. downloading cad file and use plywood of thickness was 2mm to laser cut.
2. radio system, number of channel was at least 5.
3. Hex nylon standoffs:
       m3*10.......x 8
       m4*25.......x 4
4. Nylon screw
       m3*8........x 12
       m4*12.......x 12
5. Hex nylon nut
       m3........x 8
       m4........x 12
6. steel screw m2*12 x 8
7. ESC: Platinum-60A-PRO x 1
8. motor: DUALSKY 3548ca-5 850kv x 1 (not recommend, The reason in the following)
9. controller/autopilot: APM2 or MWC(MWC is best)
10. propellers: gws 1045 3-blade x 1
11. battery: 6S 1300mAh x 1
12. servo: springRC SM-S3481M x 3, SM-S3471M x 1
13. epoxy glue, recommend prepare a glue gun
14. Flange bearings 4*7*2.5 x 4

About motor: the 3548ca-5 850kv can't work in 6s cell. I ignore this bug in project beginning, so my all design keep this trouble. Now I no time and money to find new motor and propeller, make whole new design. They need make about 4kg thrust, it's not easy found. But fortunately i have four 3548ca-5 850kv, Now three motor let me go on test flying. Maybe your can found other engine to make it.

Step 3: Reference for the Frame

Step 4: Air Valve

Step 5: Build Body

Step 6: First Put All Air Valve Into Frame, Then Close It

Step 7: Wait One Night for Glue Become Most Strong

Step 8: Assemble Servos and Valve's Position Hit

Step 9: Put Motor and ESC Into Frame

Step 10: Control System

We can image Helicopter was 3 point: left, right, rear. Power of these point sometime change smaller, sometime change bigger. But My flyingcar always smaller.

how to make robot

Assalam o alikum!💐
   

how to make robot:

before starting i wanna inform you that what is a robot, by defination 

a machine capable of carrying out a complex series of actions automatically, especially one programmable by a computer .

making robot from cardboard :

 for this purpose you need cardboard sheet's. 

1.  dc motor's with gear having atleast 150RPM.
2.  big tyre of toy car.
3. glue gun.
4. momentry contact push button's.
5. wire's

batteries of 9V.

for the detail of making see this vedio it will show you every thing step by step.

circuit diagram's and coding of line following robot.

Assalam o alikum!
                           
                          this article will show code and circuit diagram of l.f.r

1)                                this diagram show's how l.f.r work's

2)              when lfr is on track (following black line).

moving forward,left,right and stoping.

circuit diagram

---------x-------x-----x------x------x-------x------x------x------x------x-----x-----x------x-----x----x----------

CODE

/*------ Arduino Line Follower Code----- */
/*-------definning Inputs------*/
#define LS 2      // left sensor
#define RS 3      // right sensor

/*-------definning Outputs------*/
#define LM1 4       // left motor
#define LM2 5       // left motor
#define RM1 6       // right motor
#define RM2 7       // right motor

void setup()
{
  pinMode(LS, INPUT);
  pinMode(RS, INPUT);
  pinMode(LM1, OUTPUT);
  pinMode(LM2, OUTPUT);
  pinMode(RM1, OUTPUT);
  pinMode(RM2, OUTPUT);
}

void loop()
{
  if(digitalRead(LS) && digitalRead(RS))     // Move Forward
  {
    digitalWrite(LM1, HIGH);
    digitalWrite(LM2, LOW);
    digitalWrite(RM1, HIGH);
    digitalWrite(RM2, LOW);
  }

  if(!(digitalRead(LS)) && digitalRead(RS))     // Turn right
  {
    digitalWrite(LM1, LOW);
    digitalWrite(LM2, LOW);
    digitalWrite(RM1, HIGH);
    digitalWrite(RM2, LOW);
  }

  if(digitalRead(LS) && !(digitalRead(RS)))     // turn left
  {
    digitalWrite(LM1, HIGH);
    digitalWrite(LM2, LOW);
    digitalWrite(RM1, LOW);
    digitalWrite(RM2, LOW);
  }

  if(!(digitalRead(LS)) && !(digitalRead(RS)))     // stop
  {
    digitalWrite(LM1, LOW);
    digitalWrite(LM2, LOW);
    digitalWrite(RM1, LOW);
    digitalWrite(RM2, LOW);
  }

}

line following robot by using ardiuno 'uno'

Assalam o Alikum!

Line Following Robot (L.f.R)

it's a simple car that follow's the line for moving from one place to another. hence it's called line following robot.

it's uses several component's of electronics for becoming LFR.

Component's:

 LFR uses

1. Body.
2. motor's.
3. gear system (if motor's are dc).
4. Ardiuno (uno). 
5. motor drive.
6. battery.
7. jumper wire's
8. sensor's. 

Description of component's.

Body:

  for body it's must that it should be good looking and lieghtr in weight bcz it has to move fast and bear load on it to0.

Motor:

motor's doen't mean that u use heavier one u can simply use a dc motor with gear system running on 7 or 12 volt's but it's torque should be greater then 100. bcz rpm doesn't matter that much as torque matter's.

Ardiuno:

 it's a controller that will give instruction's and the motor's would be driven by motor drive. 

Sensor's:

if you wanna win the lap and even the contest too your sensor's should be good enough.

How to assemble it:

the final stage will show you vedio how to do it's assmbling.

                               

PID controller controlling speed of a dc motor.

THE PID CONTROLLER:

The term PID is an acronym that stands for Proportional Integral Derivative. A PID controller is part of a feedback system. A PID system uses Proportional, Integral, and Derivative drive elements to control a process. Some of you already know what P, I, and D stand for. Don’t worry if you don’t; we will soon cover these terms with easy-to-understand examples.

Why Do I Need PID Control?

You need the PID because there are some things that are difficult to control using standard methods. Let me illustrate with an example. My first experience with control systems was a failure. My goal was to regulate the output of a power supply using a PIC microcontroller. The PIC read the output voltage with an AD converter and adjusted a PWM to regulate the output. The control strategy was very simple: If the voltage was below a set-point, turn on the PWM. If the measured voltage was above the set-point, then turn off the PWM. The PIC power supply almost worked. It did produce the DC output voltage that I wanted. Unfortunately, it also has a significant AC ripple riding on the DC signal.

What Is Integral?

Integral is shorthand for integration. You can think of this as accumulation (adding) of a quantity over time. For example, you are now integrating this information into your store of knowledge. Your store of knowledge has components of both time and knowledge. Obviously, we all started as babies with virtually no knowledge. Over time, we have integrated knowledge into our brains.
In our PID controller, we are integrating voltage as time progresses. A schematic of an integrator circuit is shown in Figure:

What Is Derivative?

The derivative is a measurement of the rate of change. The ideal differentiator is shown in Figure. This circuit looks similar to the high pass filters you have seen in other schematics. Low frequencies are attenuated, while high frequencies are allowed to pass. The mathematics that describes the differentiator is:
V_out = -RC * (rate of change)
Rate of change is equivalent to measuring the slope of a line. Slope is a measure of the change in voltage divided by the change in time. In mathematical terms, this is referred to as a delta voltage over delta time or simply dv/dt. If we apply a ramp to the differentiator, we get a steady DC output voltage. Figureillustrates the input/output relationship of a differentiator.

 

Servo Motor System:

Now that we are familiar with the P, I, and D terms, let’s examine how they are combined to form a complete system. We will be using the PID controller to control a DC servo motor. I used a Hitec brand servo motor typically found in R/C model cars and airplanes. This servo is inexpensive and readily available. You can also purchase replacement gears — more of that in the next installment.

 

 

PID Block Diagram:

A block diagram showing the functional relationships of the PID controller is shown in figure.

CIRCUIT DIAGRAM:


CIRCUIT DESCRIPTION:
This schematic is an adaptation of the PID controller presented by Professor Jacob in his book, Industrial Control Electronics. This type of system has the advantage of easy tuning. This circuit is also simple and easy to construct.
The schematic has the same physical layout as the block diagram. Op-amp U1 is used as the summing junction for the set-point and measured motor position. The individual P, I, and D functions are implemented by U2, U3, and U4, respectively. Finally, op-amp U5 sums the individual PID terms. The P and I terms are inverted, while the D term is not. Darlington transistors have been added to U5 to boost the current to a level sufficient to drive the motor.
The individual P, I, and D components appear just as they were presented earlier in this article. Each of the terms has a variable resistor to adjust its gains. The adjustment (tuning) of this circuit is the topic for the next installment.

Component selection for this circuit is not critical. The variable resistors should be multiturn for ease of adjustment. General-purpose op-amps may be used; however, U3 should be a FET input type. The FET design is better for the integrator, since it will not self-charge the integrator capacitor. I found a quad op-amp — such as the LF347N — to be ideal for this application. Large capacitors are required for the integrator and derivative circuits. The large values necessitate that electrolytic capacitors be used. The electrolytic capacitor may be operated as a non-polarized capacitor by placing two capacitors in series, as shown in the schematic.

FIFA

This article is about the governing body of association football. For the video games, see FIFA (video game series).

The Fédération Internationale de Football Association (FIFA /ˈfiːfə/ FEEF-ə; French for "International Federation of Association Football") is an association which describes itself as an international governing body of association football, futsal, and beach soccer. FIFA is responsible for the organization of football's major international tournaments, notably the World Cup which commenced in 1930 and the Women's World Cup which commenced in 1991.

FIFA

Fédération Internationale de Football Association
Map of the members of FIFA according to their confederation
Abbreviation	FIFA[1]
Motto	For the Game. For the World.
Founded	21 May 1904; 113 years ago
Type	Federation of national associations
Headquarters	Zürich, Switzerland
Coordinates	47°22′53″N8°34′28″E
Region served	Worldwide
Membership	211 national associations
Official languages	English French German Spanish
President	Gianni Infantino
Senior Vice-President	David Chung
Vice-Presidents	Salman Bin Ibrahim Al-Khalifa Aleksander Čeferin David Gill Alejandro Domínguez Ahmad Ahmad Victor Montagliani[2]
Secretary General	Fatma Samoura
Affiliations	International Olympic Committee International Football Association Board
Staff	103
Website	www.fifa.com

FIFA was founded in 1904 to oversee international competition among the national associations of Belgium, Denmark, France, Germany, the Netherlands, Spain, Sweden, and Switzerland. Headquartered in Zürich, its membership now comprises 211 national associations. Member countries must each also be members of one of the six regional confederations into which the world is divided: Africa, Asia, Europe, North & Central America and the Caribbean, Oceania, and South America.

Although FIFA does not control the rules of football (that being the responsibility of the International Football Association Board), it is responsible for both the organization of a number of tournaments and their promotion, which generate revenue from sponsorship. In 2013, FIFA had revenues of over 1.3 billion U.S. dollars, for a net profit of 72 million, and had cash reserves of over 1.4 billion U.S. dollars.^[3]

Reports by investigative journalists have linked FIFA leadership with corruption, bribery, and vote-rigging related to the election of FIFA President Sepp Blatterand the organization's decision to award the 2018 and 2022 World Cupsto Russia and Qatar, respectively. These allegations led to the indictments of nine high-ranking FIFA officials and five corporate executives by the U.S. Department of Justice on charges including racketeering, wire fraud, and money laundering. On 27 May 2015, several of these officials were arrested by Swiss authorities, who were launching a simultaneous but separate criminal investigation into how the organization awarded the 2018 and 2022 World Cups. Those among these officials who were also indicted in the U.S. are expected to be extradited to face charges there as well.^[4][5][6] Many officials were suspended by FIFA's ethics committee including Sepp Blatter^[7] and Michel Platini.^[8] In early 2017 reports became public about FIFA president Gianni Infantino attempting to prevent the re-elections^[9] of both chairmen of the ethics committee, Cornel Borbély and Hans-Joachim Eckert, during the FIFA congress in May 2017.^[10][11] On May 9, 2017, following Infantino's proposal,^[12] FIFA Councildecided not to renew the mandates of Borbély and Eckert.^[12] Together with the chairmen, eleven of 13 committee members were removed.^[13]

Pakistan Super League

 (Urdu: پاکستان سپر لیگ‬‎; Sindhi: پاڪستان سپر ليگ‎, PSL) is a men's professional Twenty20 cricket league, sanctioned by the Pakistan Cricket Board, that represents the sport's highest level in Pakistan. The league was founded in Lahore on 8 September 2015 and presently comprises 6 teams. Instead of operating as an association of independently owned teams, the league is a single entity in which each franchise is owned and controlled by investors.

The commercial rights to the initial franchises were sold for US$93 million for a span of 10 years in December 2015. The market value of PSL in 2017 was up to US$300 million, according to Arif Habib.^[3]

The PSL season runs between the months of February and March, with each team playing 10 matches in double round robin format; the top 4 teams with the best record qualify for the Playoffs and culminates in the championship game, the PSL Cup Final. The league's head offices are directed out of the Pakistan Cricket Board head office in Lahore. Due to security reasons, the first season was played entirely in the United Arab Emirates. The inaugural champions were Islamabad United. Peshawar Zalmi were the 2017 PSL Champions, having defeated Quetta Gladiators in Lahore on 5 March 2017.

• 
  
• 
  History

Establishment[edit]

In September 2015, the PCB officially announced the launch of the PSL. Former Pakistani national team captains Wasim Akram and Rameez Raja signed up to promote the PSL and become brand ambassadors of the league for three years.^[4]

After several years of planning and two previous failed attempts,^[5][6] the league officially began on 4 February 2016 in the United Arab Emirates where Bakhtawar Bhutto-Zardari, alongside Sheikh Nahyan bin Mubarak Al Nahyan, inaugurated the opening ceremony.^[7]. The first two seasons included five teams nominally based in Pakistani cities.^[8][9] In its first season the PSL had a higher percentage of international players. The league uses a draft system for player recruitment similar to that used in many North American professional sports leagues and as opposed to the auction system used in some other T20 leagues.^[10]

The PSL's official logo was launched on 20 September 2015 in a ceremony in Lahore, and was revealed by 3Di.^[11] The ceremony was attended by current and retired cricketers, as well as Pakistani celebrities.

Expansion[edit]

The possibility of adding a sixth team to the league in 2017,^[12] possibly in Kashmir, was also under discussion, but was rejected by the middle of May 2016.^[13][14][15]

Sethi announced that there would be the sixth team in next season of PSL, few days after 2017 PSL held. Khyber Pakhtunkhwa Governor Iqbal Zafar Jhagra announced that the PSL administration will be approached for the participation of team FATA as the sixth team in PSL 2018. He said PSL administration will be approached for the participation of FATA Team.^[16][17] Hafiz Hafeezur Rehman, chief minister of Gilgit-Baltistan, also said to have the sixth team from Gilgit-Baltistan. PCB short-listed five names for sixth team; Faisalabad, FATA, Hyderabad, Dera Murad Jamali and Multan.^[18]

The final name of the sixth team for PSL 2018 season was announced on 1 June 2017; Multan Sultans; owned by Schön Properties at $5.2 million annually.^[19][20]

Profits[edit]

In May 2016, the PCB officially announced that the inaugural season of the PSL yielded profits of US$2.6 million.^[21] However, profits for the 2017 season were not officially disclosed.

Format[edit]

PSL Playoffs

The PSL is played in a double round-robin format. Every team plays each other twice and the top four advance to the Playoffs.

The league follows the rules and regulations dictated by the ICC, although it introduced DRS system in T20s which was later emulated by ICC as well. In the group stage, two points are awarded for a win, one for a no-result and none for a loss. In the event of tied scores after both teams have faced their quota of overs, a super over is used to determine the match winner. In the group stage teams are ranked on the following criteria:

1. Higher number of points
2. If equal, better run rate
3. If equal, highest number of wins
4. If equal, least number of losses
5. If still equal, the results of head to head meeting

In any play-off match in which there is no result, a super over is used to determine the winner. If the super over is not possible or the result of the over is a tie, the team which finished in the highest league position at the end of the regular season is deemed the winner of the match.

Teams[edit]

Peshawar

Islamabad

Lahore

Multan

Quetta

Karachi

Cities represented by PSL teams

According to a PCB press release, around 20 parties showed an interest in buying franchises for the league before the first season.^[22] On 18 October 2015 the Pakistan Cricket Board began accepting tenders for franchises with a deadline for bids of 15 November.^[23]

According to a statement by the PCB, bid winners would be granted the rights to a franchise for a term of ten years.^[24]Interested parties included the ARY Group, Omar Associates, Arif Habib Group, Haier, Mobilink as well as international groups including Leonine Global Sports and the Qatar Lubricants Company (QALCO).^[25]

All five franchises for the first season of the league were sold on 3 December 2015, for a total price of US$93 million, after seven bidders presented formal proposals.^[26][27]

In April 2017, PCB invited bids for the sixth team and the deadline set for the submission of both the financial and technical proposals was May 30 and as many as 40 national and international parties expressed an interest in buying the sixth franchise.^[28]

On 1 June 2017, from five regions short-listed by PCB Multan was bought by Schön Properties for a price of US$5.2 million per year becoming the most expensive team of the PSL.^[29]

Team		City/Province	Owner	Price	Founded	Home ground	Captain	Coach
	Islamabad United	Islamabad, Capital Territory	Leonine Global Sports (Ali Naqvi & Amna Naqvi)	US$15 million (ten-year agreement)	2015[a]	Rawalpindi Cricket Stadium	Misbah-ul-Haq	Dean Jones
	Karachi Kings	Karachi, Sindh	ARY Group (Salman Iqbal, CEO)	US$26 million (ten-year agreement)	2015[a]	National Stadium	Imad Wasim	Mickey Arthur
	Lahore Qalandars	Lahore, Punjab	Qatar Lubricants Company (Fawad Rana, MD)	US$25 million (ten-year agreement)	2015[a]	Gaddafi Stadium	Brendon McCullum	Aqib Javed
	Multan Sultans	Multan, Punjab	Schön Properties (Nasir Schon & sons)	US$41.6 million (eight year agreement)	2017[b]	Multan Cricket Stadium	Shoaib Malik	Tom Moody
	Peshawar Zalmi	Peshawar, Khyber Pakthunkhwa	Haier Pakistan (Javed Afridi, CEO)	US$16 million (ten-year agreement)	2015[a]	Arbab Niaz Stadium	Darren Sammy	Mohammad Akram
	Quetta Gladiators	Quetta, Balochistan	Omar Associates (Nadeem Omar, Director)	US$11 million (ten-year agreement)	2015[a]	Ayub National Stadium	Sarfraz Ahmed	Moin Khan

Results[edit]

Season results[edit]

Season	No. of teams	Final			Venue	Player of the series
		Winner	Winning margin	Runner-up
2016 Details	5	Islamabad United 175/4 (18.4 overs)	6 wickets (scorecard)	Quetta Gladiators 174/7 (20 overs)	Dubai International Cricket Stadium, Dubai	Ravi Bopara (Karachi Kings)
2017 Details	5	Peshawar Zalmi 148/6 (20 overs)	58 runs (scorecard)	Quetta Gladiators 90 (16.3 overs)	Gaddafi Stadium, Lahore	Kamran Akmal (Peshawar Zalmi)

Team results[edit]

Teams	2016	2017	2018
Islamabad United	W	4th
Karachi Kings	4th	3rd
Lahore Qalandars	5th	5th	6th
Multan Sultans	–	–
Peshawar Zalmi	3rd	W
Quetta Gladiators	R	R

Debutant teams[edit]

Year	Team(s)
2016	Islamabad United,  Karachi Kings,  Lahore Qalandars,  Peshawar Zalmi,  Quetta Gladiators
2018	Multan Sultans

Overview[edit]

The table below provides an overview of the performances of teams. Teams are sorted by best performance, then by total number of wins, total number of games, and alphabetical order respectively.

	Appearances				Statistics
Team	Total	First	Latest	Best result	Mat.	Won	Lost	Tied	Tie&W	Tie&L	NR	Win%*
Peshawar Zalmi	3	2016	2018	Champions (2017)	26	15	10	0	0	0	1	60.00
Islamabad United	3	2016	2018	Champions (2016)	25	13	11	0	1	0	0	54.00
Quetta Gladiators	3	2016	2018	Runners-up (2016, 2017)	25	14	10	0	0	0	1	58.33
Karachi Kings	3	2016	2018	Play-offs (2016, 2017)	23	10	13	0	0	0	1	43.47
Lahore Qalandars	3	2016	2018	Group Stage (2016, 2017)	21	5	15	0	0	1	0	23.80
Multan Sultans	1	2018	2018	-	5	3	1	0	0	0	1	75.00
Last Updated: 4 March 2018 Source: [30]

Individual awards[edit]

The Hanif Mohammad award and a green cap are awarded to the leading run-scorer. It is an ongoing competition with the leading run-scorer wearing the cap throughout the tournament until the final game, with the eventual winner keeping the cap and receiving the award for the season.^[31] The Fazal Mahmood award and a maroon cap are awarded to the leading wicket-taker in the same way^[32] whilst the Imtiaz Ahmed award is awarded to the best wicket-keeper. All three awards were introduced in the 2017 Pakistan Super League season.^[33]

Team records[edit]

Main article: List of Pakistan Super League records and statistics

Team	Span	Mat	Won	Lost	Tied	Tie&W	Tie&L	NR	Win %
Islamabad United	2016–present	25	13	11	0	1	0	0	54.00
Karachi Kings	2016–present	24	10	13	0	0	0	1	43.47
Lahore Qalandars	2016–present	21	5	15	0	0	1	0	23.80
Peshawar Zalmi	2016–present	27	15	11	0	0	0	1	57.69
Quetta Gladiators	2016–present	25	14	10	0	0	0	1	58.33
Multan Sultans	2018–present	6	4	1	0	0	0	1	80.00

Source: ESPNcricinfo; Last Updated: 7 March 2018

Note:

• Tie&W and Tie&L indicates matches tied and then won or lost by "Super Over"
• The result percentage excludes no results and counts ties (irrespective of a tiebreaker) as full win.

Sponsorship[edit]

The PSL's initial title sponsorship was awarded to HBL Pakistan for three years in December 2015.^[34] Sponsorship deals associated with the league including the title sponsorship, are estimated to be worth more than $6 million.^[35]

Broadcast[edit]

For the first three seasons of the league, Sunset + Vine were awarded production rights as official broadcasters, and PTV Sports, Ten Sports and Geo Super were awarded broadcast rights in Pakistan. The value of the broadcasting deal was US$15 million, with the PCB selling the global television rights to Tech Front, a UAE group.^[36]

In 2017, DSports (India) bought the broadcasting rights of PSL, becoming the first channel in India to do so.

Matches streamed live in Pakistan on YouTube, and on PSL official site and app through cricketgateway.pk; while streamed globally on cricketgateway.com.^[37][38]

Territory	Years	Channels
Pakistan	2016–present	PTV Sports Ten Sports Geo Super
Afghanistan	2017–present	Moby
Australia	2017–present	Channel 44
Bangladesh	2016–present	Gazi TV
Canada	2017–present	Sportsnet Willow TV
Caribbean	2016–present	Flow TV
India	2018-present	DSport[39]
Kenya	2017–present	Star Times
Middle East & North Africa	2016–present	OSN Sports
New Zealand	2017–present	Sky Sport
South Africa	2017–present	Star Times SuperSport
Sri Lanka	2016–present	Ten Sports CSN Dialog TV
United Kingdom	2016–present	Prime TV: Sky 792 A-Plus TV Channel 44 UK
USA	2017–present	A-Plus TV Willow TV [Yupp TV]]
Zimbabwe	2017–present	SuperSport

Advertising rights for the first three years of the league's operation were awarded to Pakistani company Blitz Advertising.^[40]

Footnotes